Axiohm 7156 Especificações descarregar pdf (Página 94)

Commands 7156 Owner’s Guide

October 199586

Print and Feed n Minimum Units

Prints one line from the buffer and feeds the paper n/360 of an inch on the receipt

station or n/144 of an inch on the slip station.

On the receipt station, the line height equals the character height when n is too

small. This does not apply to the slip station. Use n = 0 to print a line without

feeding the paper. This allows the printer to print on the last line of the slip (at .59

inches from the trailing edge) and still retain the slip in the feed rollers for reverse

feeding the paper back out of the slip station.

Hex Decimal ASCII Value of n

1B 4A n 27 74 n ESC J n

0-255

n is always less than or equal to the current

selected column width.

Print and Reverse Feed n Minimum Units (Slip Station)

Prints one line from the buffer and reverse feeds the paper n/144 of an inch on

the slip station. The receipt station cannot be reverse fed. If the receipt station is

selected, the paper is fed forward n/360 of an inch.

Hex Decimal ASCII Value of n

1B 4B n 27 75 n ESC K n

0-255

Set or Cancel Unidirectional Print (Slip Station)

Toggles between unidirectional and bidirectional printing on the slip station.

Unidirectional printing reduces column alignment tolerances and provides higher

quality printing. Printing is normally bidirectional because of the faster speed.

Hex Decimal ASCII Value of n Default

1B 55 n 27 85 n ESC U n

0 = select bidirectional

1 = select unidirectional

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 189 190

Sem comentários

Axiohm 7156 Especificações Página 94