Axiohm 7156 Especificações descarregar pdf (Página 89)

7156 Owner’s Guide Commands

October 1995 81

Prints one line from the buffer and feeds paper one line.

Hex Decimal ASCII

17 23 ETB

Open Form (Slip Station)

Opens the feed roller and platen (forms compensation arm assembly) so that a

form may be inserted (default position).

Hex Decimal ASCII

18 24 CAN

Full Knife Cut

This command is implemented the same as Partial Knife Cut (1A, 1B 6D). Use

either Hex 19 or Hex 1B 69.

Hex Decimal ASCII

1B 69

27 105

ESC i

Partial Knife Cut

Partially cuts the receipt. The length of the cut can be changed through the DIP

switches. See “Setting Partial Cut Distance” on page 43. The default setting leaves

.20 inches (5 mm) of paper on the left edge. The cut edge is 108 dot rows or .71

inches (18 mm) above the receipt print line. The command is valid only at the

beginning of a line.

Use either Hex 1A or Hex 1B 6D.

Hex Decimal ASCII

1B 6D

27 109

SUB

ESC m

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 189 190

Sem comentários

Axiohm 7156 Especificações Página 89