Axiohm 7156 Especificações descarregar pdf (Página 93)

Chapter 5: Technical Specifications 5-11

Minimum form length (feed direction) for forms inserted from the

front up to the slip stop is 68 mm (2.68 inches) w/o check flip option

and 70 mm (2.75 inches) w/Flip option. Minimum form width (print

direction) is 51 mm (2.00 inches). These minimums ensure the form

covers both optical slip detectors, and expose about one inch of the

form to push in place.

The form must be at least 127 mm (5.00 inches) wide to print all 66

standard or 80 compressed columns. Large forms may be inserted

from the left side and override the slip stop. Forms over 170 mm (6.70

inches) wide will extended outside the left side of the printer.

Receipt Media

• Direct thermal paper, with or without environmental coating.

• Paper thickness range: 51–86 µm (2.0–3.4 mil).

• Receipt roll width: 80 + .2 - .6 mm (3.150 + .008 - .024 inch).

• Receipt roll diameter: 90 mm (3.54 inch) maximum.

• Receipt roll capacity: * 98M (322 feet) of 61µm (2.4 mil) thick

paper

73.5M (241 feet) of 81µm (3.2 mil) thick

paper

• Roll construction: Image side facing out.

• End-of-roll warning: Stripe recommended, not required.

* Based on core diameter of: 22 ± .5 mm (.87 inch) outside,

11.5 ± .5 mm (.45 inch) inside.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 313 314

Sem comentários

Axiohm 7156 Especificações Página 93