Axiohm 7156 Especificações descarregar pdf (Página 250)

7-122 Chapter 7: Programming Guide

Select Page Mode

ASCII: ESC L

Hexadecimal: 1B 4C

Decimal: 27 76

Switches from Standard Mode to Page Mode. After printing has been

completed either by the Print and Return to Standard Mode (FF)

command or Select Standard Mode (1B 53) the printer returns to

Standard Mode. The developed data is deleted after being printed.

This command sets the position where data is buffered to the position

specified by Select Print Direction in Page Mode (1B 54) within the

printing area defined by Set Print Area in Page Mode (1B 57).

This command switches the settings for the following commands

(which values can be set independently in Standard Mode and Page

Mode) to those for Page Mode.

1. Set Right-Side Character Spacing (1B 20)

2. Select 1/6-Inch Line Spacing (1B 32)

3. Set Line Spacing (1B 33)

It is possible only to set values for the following commands in Page

Mode. These commands are not executed.

4. Select or Cancel 90 Degree Clockwise Rotation (1B 56)

5. Select Justification (1B 61)

6. Select or Cancel Upside-Down Printing (1B 7B).

7. Set Left Margin (1D 4C)

8. Set Print Area Width (1D 57)

Exceptions:

The command is enabled only when input at the beginning of a line.

The command is available only when the receipt is selected by Select

Paper (1B 63 30). The command has no effect if Page Mode has

previously been selected. The Select Paper (1B 63 30) command can not

be used in Page Mode. In A756 Emulation

Mode, (1B 4C…) is used for

double density graphics.

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 313 314

Sem comentários

Axiohm 7156 Especificações Página 250