Axiohm 7156 Especificações descarregar pdf (Página 49)

Chapter 3: Using the Printer 3-11

To verify and validate a check:

2. Place the check, face down on the Slip Table, with the bottom edge

of the check to the right. Move the check to the right until it aligns

against the Check Guide.

3. Slide the check straightforward into the printer until it stops. The

green Slip-in LED on the front of the printer comes on.

Note: IMPORTANT: Hold the check to the right, against the Check

Guide and release it as soon as the printer begins to run.

4. Follow the instructions on the host computer to complete the MICR

process:

a. When instructed by the host, the check is fed into the printer,

read and backed out to a position ready for endorsement, if

desired.

b. With the optional check-flip feature, the check is fed into the

printer, verified, fed up into the check flip mechanism, flipped,

fed back into the printer, printed on the front and released.

Note: If the terminal indicates an incorrect read of the MICR:

• Remove the check.

• Reinsert the check, ensuring instructions 1 through 3 above

are followed.

5. Only remove the check when it is fully released by the printer.

6. Continue to follow the instructions from the host computer to

finish the transaction.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 313 314

Sem comentários

Axiohm 7156 Especificações Página 49