Axiohm APOS PRINTER SERIES Manual do Utilizador descarregar pdf (Página 36)

APOS KANJI User Manual Page 36 / 45

Ref : 3103039-FDE Issue A

4.1.41. GS C0

(Description) Select counter print mode

(Format) <1Dh> <43h> <30h> <m> <n>

(Comments) Sets the format of how the counter is printed.

0 <= m <= 5

If m = 0, all digits of the counter will be printed, otherwise <m> of the least-

significant digits will be printed.

The default value is m=0

0 <= n <= 2

The value of <n> describes how the printed counter value shall be justified as

shown in the table below. Both m and n are ignored if out of range.

(Cross reference) GS c, GS C, GS C1, GS C2

n Adjustment Empty digits filled

0 right with spaces

1 right with 0s

2 left with spaces

4.1.42. GS C1

(Description) Select binary counter mode

(Format) <1Dh> <43h> <31h> <n1> <n2> <n3> <n4> <n5> <n6>

(Comments) The start value of the counter is

start = (n1 + n2 x 256), default value is 1

The end value of the counter is

end = (n3 + n4 x 256), default value is 65535

If start > end, the counter will increment after each time the command GS c is

used. If end > start, the counter will decrement after each time the command

GS c is used. When the counter exceeds the value of end it will reset to the

value of start.

The increment or decrement step is the value of n5. Setting this value to 0

will stop the counter.

The counter will reset to the value start only n6 times. After this it will stop

counting. Also, setting this value to 0 will stop the counter.

0 <= n1, n2, n3, n4, n5, n6 <=255

(Cross reference) GS C0, GS C2, GS c, GS C

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 44 45

Sem comentários

Axiohm APOS PRINTER SERIES Manual do Utilizador Página 36